How to reset dsc alarm after power outage outages

The security system has up to eight zones or areas of protection. Each zone used will have connected to it various sensors, such as door or window contacts, motion detectors, glassbreak detectors and vibration or shock sensors. When a sensor is in alarm, a keypad light will be on to indicate which zone is in alarm. Many malfunctions, including false alarms, or alarm events when the alarm is not even set, can be traced back to the battery. If the battery becomes fully depleted and there is a power outage, the alarm panels will stop functioning and the alarm may begin to whine until the battery has no charge at all. Light 2, Power Off to alarm panel, (power off, breaker off, transformer bad or unplugged). Light 3, Telephone Line Trouble, no phone line working on the alarm system phone jack. Light 4, Failure to Communicate, on the last alarm the system could not make a call to.

Yellow Trouble Light? Setting the Time and Date on a DSC Keypad!

How To Reset Dsc Alarm After Power Outage Outages

A DSC alarm system should run off of battery power for several hours during a power outage, but if you have a longer period of downtime, the batteries can be drained. When that happens, you will need to reset the sensors using the keypad on the control unit. Step 1 Open the access door on the unit.

If you have a DSC Security System, then you may have experienced yellow trouble lights on your DSC keypad. These blinking yellow lights can mean a number of different things, but if you see a blinking light and your DSC keypad is also displaying an incorrect time and/or date, then chances are they’re indicating that you need to reset the time and date on your DSC keypad.

How To Reset Dsc Alarm After Power Outages

The most likely cause of a DSC alarm system displaying the incorrect time or date is a power outage. You’re probably already familiar with the process of resetting the clocks on your stove, microwave, and other appliances in the home when the power goes out, and the same goes for your DSC Security System. On rare occasions, Daylight Saving Time may also require you to reset the time and date on your DSC keypad, though most DSC residential and commercial alarm systems are programmed to automatically adjust to Daylight Saving Time—which is Sunday, November 6 at 2am, by the way!

How To Reset Dsc Alarm After Power Outage

Whatever the reason you may need to reset the time and date on your DSC keypad, it’s simple enough to do once you know the steps. Here’s how:

Not every DSC keypad looks exactly the same, but the steps to reset the time and date on your DSC keypad are the same no matter which keypad you have. The first step is to press star (*) then 6, and then enter the 4-digit master code for your DSC commercial or residential alarm system. After that you just need to press 1 to access the time and date feature.

Once you’re in, you’ll enter the time and date in 2-digit values starting with hours, followed by minutes, then month, day, and year. To reset the time and date on your DSC keypad, time must be entered in 24-hour format. So to enter 9:54am you would enter the numbers 0-9-5-4. If it were the 23rd of September, you would then enter 0-9 for the month and 2-3 for the day. Since it’s currently 2016, you would enter 1-6 for the year.

After you’ve reset the time and date on your DSC keypad you should hear a few beeps and then the time and date should be displaying correctly. If the time and date are correct and the yellow trouble lights on the DSC keypad are still blinking, then that’s an indication that something else may be wrong, and you should call your Kansas City alarm system provider right away!

How To Reset Dsc Alarm After Power Outage Today

Resetting the time and date on your DSC keypad may sound a little complicated when we spell it out like this, but we’ve recorded a short two-minute YouTube video on how to set the time and date on a DSC security system that will walk you through the entire process quickly and easily! If you have any questions about resetting the time and date on your DSC keypad, if the trouble lights on your DSC keypad are still blinking, or if you simply want to know more about commercial or residential alarm systems in Kansas City, please don’t hesitate to contact A-TEC Security today.